A Clean Tail Setup
Parts used to build it....
Custom Dynamics Integrated LED License Plate Frame
I also used their LED bolts for the corners to give extra turn signal lights.
Chrome Adjustable Taillight Bracket
Found both the bracket and tailight at Debrix Cycles, but you can find them at many shops.
Trim the mounting bracket to fit the contour of the fender so it will fit up tight in the fender.
The license plate bracket bolts to the last strut bolt.
I used some stainless button heads and t-nuts from Home Depot to fill the old holes. I use the same type of setup on all the strut bolts.
If you take your time and carefully trim the bracket, it will fit nice and snug up in the fender and will not have any gaps.
This picture is why I stopped using chrome bolts and went to all stainless.
Used this tallight because it was rather shallow so I could end up with it flush with the fender.
Hope this helps, as always if you have any questions feel free to send me an e-mail and I will be happy to help.
